Decorative plaster look grain of rice
- Status
- The offer is out of date
- Minimal order
- 25 kilograms
- Available quantity
- 10000 kilograms
- Country
- Romania
- Grade
- New
- Brands
- Finish - Only
- Delivery time
- 15 days
- SKU:
- C1525609
- Last update
- 7 months ago
Current offers in this category
Offer's description
It is a decorative plaster structured, looking "grain of rice" based on acrylic-stire¬nice dispersions, pigments and marble granules are used for exterior and interior finishes. It can be applied on any surface mineral base: usual plasters, gypsum plasters, concrete, gypsum plates and old paint. It is weatherproof, highly resistant to mechanical shock, impact, abrasion and scratching.
Basic surface preparation: The support surface must be perfectly dry, smooth, clean, de-sprafuita and defatted, without loose particles. The repaired areas shall have the same structure as that of the existing surface.
Application Instructions: surfaces must be primed with plaster primer at least 24 hours before applying the decorative plaster. The material is applied manually to a thickness of plaster granu¬latia (1.5 mm) with stainless steel trowel by trowel and broken circular with a smooth plastic float. Do not apply on very fragile surfaces (eg. Painting existing clay, lime plaster, lime plaster, plasters facade - outdoors). Do not apply to a range of less than 2 hours after termination of rain (temperature conditions that allow drying su¬prafetei). For prevention of lures, plaster will be applied in a single step in the process "wet on wet" (without interruption). This requires the presence of a sufficient number of applicators on the scaffold; It will not work under very high temperatures under the direct influence of the sun, strong wind, fog, high humidity over 80% and risk of rain and frost. Under the conditions of high temperatures and very high it is recommended that the application of plaster to make 2% diluted with water and binding on the side of the facade which is not directly exposed to sunlight. It is recommended to reapply the product after the local purpose of carrying out repairs and adjustments over a surface already applied because those areas will stand out in the general appearance of the finish. Substrate and air temperature should be between 5 ° C and 25 ° C.
Colored plaster important: using natural aggregates are possible variations in hue; It is therefore only be used on the same surface with the same number of the batch material; otherwise materi¬alele will mix with each other, to avoid obtaining different shades. Cleansing gear is done with water or soapy water immediately after use. Drying time superficial (touch): 4:00, dryness (ball): 72 hours. Values ??are given for a temperature of 20 ° C and a relative humidity of 60%. In the first 24-72 hours after application, the surface will be protected from rain, snow, frost etc. Specific consumption: approx. 2.9 - 3.1 kg / m2. Consumption are relevant for the perfectly smooth surface. Consumption varies depending on the thickness applied and caracteris¬ticile substrate. Packaging: plastic bucket containing 25 kg. Storage: Store in a cool, dry, Temparature between 5 ° C and 30 ° C in the original packaging, unopened. Within wave-ability: 24 months from date of manufacture comply with the terms of packaging and storage. See the date of manufacture and batch labeled on the packaging.