Inverter Inverter Power Generator 2200W 3,5 km 2,4kW 230V
|PLN 1,955.00||from 400 to 500 pieces|
|PLN 2,064.00||from 100 to 399 pieces|
|PLN 2,299.00||from 16 to 99 pieces|
|PLN 2,444.00||from 5 to 15 pieces|
|PLN 2,496.00||from 1 to 4 pieces|
Inverter Inverter Power Generator 2200W 3,5 km 2,4kW 230V - description
Inverter Generator Set JB Engineering 2,2 kW
JB Engineering is a Polish brand
Planned delivery of 512 pieces to our warehouse: the beginning of January 2023
Voltage: 230V (single phase) / 50Hz and 12V DC - 8.3A
Max. AC power: 2,4kW
AC constant power: 2,2 kW
Copper generator winding
Safety switch: YES
Fuel tank capacity: 5L [petrol]
Engine power: 3.5 hp
Displacement: 97.7 cm3
Air-cooled four-stroke engine
Oil pressure sensor: YES
Oil tank capacity: 0.3L
AVR voltage regulator: YES
Average fuel consumption: approx. 400 g/kWh
Dimensions: 500x295x490 mm
Net Weight : 18.5 kgs
Sound power level Leo: 64dB
Protection class: IP23M
We are the owner of the trademark JB Engineering
PCR folding unit.
Smoothed sine wave
Double electricity conversion is a process in which electricity is converted into another form of energy and then back into electricity, and above all, provides a pure sinusoidal wave. In this technique, electrical energy is first converted into mechanical energy, then into heat or chemical energy, and finally back into electrical energy. This process allows for more efficient use of electricity and reduces losses in its conversion. Double electricity conversion is widely used in various systems such as power plants, ships or aircraft and our generators.
No voltage spike "pure sine wave" is safe for very sensitive equipment such as computers, telephones, medical equipment and all other electronics that are very sensitive to large voltage surges.
Is more power needed?
If we need more power, it is possible to connect two generators in parallel to increase the total power output, which will allow the connection of devices with higher power. With a parallel cable, two generators can be connected to each other and an output power equal to the sum of the rated power of the respective models minus +/- 0.1 kW. Combining two 2.2 kW units, we should get 4.2-4.3 kW.
Inverter unit 2,2 kW JB Engineering 3,5 km Manufacturer no: JB-Engineering-2750iS
Inverter unit 2,2 kW JB Engineering 3,5 km EAN (GTIN) 5904639943170
The engines of the inverter generator series can be used in economical mode, which reduces fuel consumption by up to 50%. In this mode, the engine runs at low speeds, which reduces energy consumption and reduces the emission of harmful substances into the atmosphere. Eco mode is especially useful in situations where the engine is used to power devices with constant power demand, such as refrigerators or air conditioners.
Unbeatable OHV engines
OHV (overhead valve) engines are a type of internal combustion engine in which the timing valves are placed above the cylinder head. This type of engine design allows for better placement of engine components and allows better access to them for operation and maintenance. OHV engines are characterized by higher efficiency and lower fuel consumption compared to engines with valves located in the head. Meets the EURO V environmental standard.
Generator with copper winding
An alternator is a type of generator that is an electrical device used to generate direct current from alternating current. Alternators are equipped with windings, that is, coils of electric wire, which are wound on a magnetic core. Windings can be made of various materials, including copper. Copper is a good electrical and thermal conductor, which allows to obtain high efficiency of the alternator with copper winding. Copper is also more resistant to corrosion than other materials, which increases the life of the alternator.
Inverter unit 2,2 kW JB Engineering 3,5 km Frequency 50 Hz
Inverter unit 2,2 kW JB Engineering 3,5 km Model JB-Engineering-2750iS
Intuitive control panel
1.DC- output socket 12v 8.3 A, 2. DC Overload – overload protection DC socket (DC protection), 3.ECO economy mode switch, 4.Low oil level indicator (yellow LED), 5.Malfunction / overload indicator (red LED), 6.Operating indicator (green LED), 7.Connector socket for parallel connection of generators, 8.AC reset – overload protection, 9.AC 230V output socket, 10.Screw ground, 11.USBx2 output socket, V.F.T METER- VFT meter stands for "Variable Frequency Test" meter.
The innovative design of the housing and the materials used for its production ensure a minimum noise level (64 dB Lpa 7 m).
The small size and light weight of JB Engineering inverter generators allow