Siliconised plaster Noua

Siliconised plaster Noua - description

It is a decorative plaster structured, looking "bark" based on acri¬lo-styrene dispersions, silicone additives, pigments and marble granules are used for exterior and interior finishes. It can be applied on any surface mineral base: usual plasters, gypsum plasters, concrete, gypsum plates and old paint. It is weatherproof, highly resistant to mechanical shock, impact, abrasion and scratching. Enable self-cleaning (picături¬le water roll down the facade, thereby dirt particles)

Basic surface preparation: the substrate must be perfectly dry, smooth, clean, dust-free and fat-free without loose particles. The repaired areas shall have the same structure as that of the existing surface.

Application Instructions: surfaces must be primed with plaster primer at least 24 hours before applying the decorative plaster. Coatings are applied uniformly, undiluted pref¬erabil the same batch with stainless steel trowel (steel float) in a layer as thin (optimum thickness of the layer should be as close to the diameter of the granules). Both surplus and shortage of material structural causes that can induce differences and color differences. Structuring (obtaining specific issue) is done using a plastic float. You can choose the layout, the direction and shape of grooves depending on how you take the structure (vertical, horizontal, round, irregular, etc.). Always remove excess material from the plastic trowel. The application must be continuous, as in the case of long waits, the material begins to dry. Structure formation must take place immediately after application, before the start drying. The material does not directly applicable in direct sunlight or on windy or when there is rain or frost risk, as they may cause during application and drying, cracking and color differences. Substrate and air temperature should be between + 5 ° C and + 25 ° C.

Drying time superficial ( touch ) : 4:00 , dryness ( ball ) : 72 hours. Values ​​are given for a temperature of 20 ° C and a relative humidity of 60 % . In the first 24-72 hours after application , the surface will be protected from rain, snow , frost etc. Specific consumption : 2.4- 2.8 kg / m² . Consumption are relevant for the perfectly smooth surface . Consumption varies depending on the thickness applied and the characteristics of the substrate . Packing: ma¬terial plastic bucket containing 25 kg . Storage: Store in a cool , dry, Temparature between 5 ° C - 30 ° C in the original packaging , unopened . Shelf life: 24 months from date of manufacture comply with the terms of packaging and storage . See the date of manufacture and batch labeled on the packaging

---

Payment options

• Bank transfer
• Cash
• Payment online

---

Delivery options

• Collection in person
• National delivery
• International delivery

---

Shipping to countries