2x Tempered Protective Glass for Garmin Fenix 7X Alogy Screen Pr Watch - description
2x Alogy Watch+ Tempered Glass Product description + key features Product highlights: Brand: Alogy Compatibility: Garmin Fenix 7X Glass dimensions (+/- 2mm): width - 40 mm, height - 40 mm Glass thickness: 0.26mm~0.3mm Coatings: Oleophobic and Hydrophobic Surface hardness: 9H Edges: 2.5D High quality and precision Tempered Glass Screen Protector WATCH+ from Alogy is an extremely durable protection for the screen of your device! High-quality materials used in the production of glass absorb the impact energy and distribute it over their entire surface. This solution will allow the glass itself to break, not your display! The glass has been covered with a special foil, which in the event of breaking quickly reduces the splashing of glass shards. Surface hardness 9H Alogy 9H tempered glass is made of a special durable material that will provide effective protection of the screen of our device. Glass can prevent any scratches and external damage to the display. Alogy tempered glass has high light transmittance, thanks to which the colors are fully preserved! Oleophobic coating The structure of the Alogy Screen Protector WATCH+ glass is equipped with an additional oleophobic coating, so the glass is not rough. Thanks to this solution, grease, dust and other dirt have fewer points of contact with the glass. This coating allows you to keep the device's display in a serviceable condition anywhere, at any time. Case compatible! Alogy glass is compatible with most cases available on the market - Case Friendly. The glass should be smaller than the inner edges of the case. Below we present a comparison of the dimensions of the slide to the actual dimension of the device: Glass dimensions (+/- 2mm): width - 40 mm, height - 40 mm Dimensions of the device: width - 51 mm, height - 51 mm How to put on tempered glass? 1. Clean your device's screen. To do this, use the cloths included in the kit. Use a static sticker to remove visible pollen. 2. Peel off the protective film. Be careful not to touch the adhesive layer. 3. Put the glass to the screen. Remember that there should be no pollen on the surface of the screen. 4. Press the glass against the screen. Wipe the screen with a cloth to get rid of any residual air that may be between the glass and the screen. It should be remembered that after application, air bubbles may remain, located under the surface of the glass, which should be led out with repetitive movements from the center to the edge, you can also peel off the glass to the place where the bubbles are located and once again slowly glue the glass by removing air, e.g. with an ATM card. In the set you will find: 2 x Tempered Glass Alogy Screen Protector WATCH+ 1 x Wet Cloth 1 x Dry Cloth 1 x Dust Absorbing Sticker 3 x Positioning Sticker Remember! Due to the rounding of the screen, the glass does not cover its entire surface - it is cut only to the flat part of the screen. This solution makes it can be used in combination with our cases. Due to the variety of milling of the edges of the displays, after the installation of glass, an air halo can form around the screen in the form of bright lines at the edge of the screen. This is a natural situation and depends on the screen itself.
Payment options
- Bank transfer
- Cash
- Payment online
- PayPal
- VISA
- MasterCard
Delivery options
- National delivery
- International delivery
