3386# Instant Glue Gel 2g Technical

3386# Instant Glue Gel 2g Technical - description

Instant cyanoacrylate glue gel 2 g
One-component, colorless with a gel consistency, glue based on ethyl cyanoacrylate with the highest parameters of technical glue, polymerizing under the influence of moisture. Due to its high viscosity and thixotropic properties, it does not run off vertical surfaces and is not absorbed by porous surfaces. It bonds metals, rubber, porcelain and many plastics very strongly within seconds.
Parameters:
- Viscosity: gel
- Shear strength: 3.5 MPa
- Max. gap to fill: 0.25 mm
- Temperature range: -55°C to 80°C
- Shelf life: 12 months
Features:
- universality
- high bonding speed
- one-component
- high viscosity
Application:
Designed for bonding: metals, rubber, wood, ceramics, cement, hard plastics, glass, leather, plywood, aluminum, etc. (except PE, PP, and Teflon). Bonds hard and elastic materials even on vertical surfaces. Also used for bonding metal combinations "metal + rubber, plastics + rubber, paper + plywood + glass, etc." and O-ring gaskets.
Benefits:
- bonds all materials except polyolefins, PTFE, silicone rubber
- short repair time
- easy to use
- does not run, does not drip, is not absorbed by bonded surfaces
Instructions for use:
1. When opening the tube for the first time, pierce the membrane with the sharp part of the cap.
2. The substrate should be clean and degreased. Degrease the surface (P-102 or P-959 Technical Degreaser).
3. Apply glue only to one of the surfaces being bonded.
4. Do not dispense glue in large amounts (the less glue, the stronger the bond).
5. After applying the glue, join the surfaces and press them together, holding them for 10 to 90 seconds depending on the material being bonded.
6. Thoroughly clean the applicator from glue residues, clear the nozzle, and close the tube.

---

Payment options

• Bank transfer

---

Delivery options

• National delivery
• International delivery

---

Shipping to countries