Sign up for FREE Newsletter - stay up to date!
Don't miss the daily updates on new products and news on Merkandi. Receive discount code for registration.
The M9 device has: - 9 sockets with protective contact (10A/250V) - safe, non-conductive, self-extinguishing housing - operation indication - easy mounting to the substrate - two-stage security system - Surge protection system: the reliability of this system is ensured by a varistor with a fast response time of less than 25 nanoseconds and a high absorbed pulse value of 6000A, which provides effective protection against surges. - Short-circuit protection system: consists of an automatic delayed-action fuse that does not require replacement. WARNING: If there is no voltage at the filter sockets, check the fuse button (red under the switch). If necessary, press after 30 seconds. Do not block the fuse button. The device should be used only in installations with a protective contact. Complete disconnection of the strip from the power supply occurs after pulling the plug out of the socket. Do not use a damaged product. Protect from water and moisture. Do not use for powering heaters, vacuum cleaners, refrigerators, and other similar devices. Use indoors only. The maximum load current of all connected devices must not exceed 10A (2300W) Specification: - Rated voltage: ~230 V, 50Hz - Maximum load: 10A (2300 W) - Switch: illuminated two-pole - Fuse: automatic with time delay 10A / 240V - Leakage current: < 0.5mA - Energy absorption: 155 J - Reaction time: < 25 ns - Permanent operating voltage Uc: ~250 V, 50Hz - Voltage level of protection Up: ≤ 1.2kV - Maximum discharge current: 6000A (L/N) - 8/20 s - Test voltage Uoc: 4kV
Don't miss the daily updates on new products and news on Merkandi. Receive discount code for registration.