Adhesive for PP PE PTFE 8g 8ml Technicqll

€6.06 /piece price excl. VAT

-5% on your first order!

Minimal order

1 pieces

Available quantity

25 pieces

Country

Poland

Grade

New

SKU:

91-471#

EAN:

5902051001935

Message

Phone call

Adhesive for PP PE PTFE 8g 8ml Technicqll - description

Kit for joining polyolefins and other difficult-to-bond materials (PTFE, silicones) with smooth, fitted surfaces. It contains a primer to increase the surface tension of polyolefins and a modified cyanoacrylate adhesive. Without Primera can be used to join standard materials. Features: High adhesive and primer activity Packaging with brush Flexible adhesive High gluing speed Benefits: Strong bonding of plastic components Precise adhesive application, low glue consumption Possibility of gluing materials with different properties Short repair time Application: Bonding of low-surface energy plastics: polyolefins (PE, PP), PTFE, silicone rubbers. Also designed for gluing: metal, rubber, wood, ceramics, cement, hard plastics, glass, leather, plywood, aluminum. It glues hard and flexible materials. Also used for bonding metal combinations "metal + rubber, plastic + rubber, paper + plywood + glass, etc. Parameters: Viscosity: 40 cP (mPas)
Shear strength: min. 3.0 MPa
Max. gap to fill: 0.10 mm
Temperature range: -550C to 800C
Shelf life: 12 months Directions for use: Clean and matt glued elements. Degrease the surface (P-102 or P-959 Technical Degreaser). Surfaces should be clean and free from dirt. Apply a thin, even layer of primera "BASE" to the surfaces to be glued. Wait 2-3 minutes. Apply a thin, even layer of adhesive to one of the surfaces (the less glue, the stronger the bond). Immediately join the elements, press and hold for a few seconds. Do not move or correct the connection.