AG22B PARKING SENSOR BUZZER

AG22B PARKING SENSOR BUZZER - description

A parking sensor is a device that assists the parking and reversing of a car. It works on the principle of sonar – it emits ultrasonic waves, which after bouncing off an obstacle allow you to determine the distance between the car and the obstacle. When reversing, the device correctly recognizes obstacles in the vehicle's path and warns the driver. The sensor is equipped with a special buzzer (buzzer) that emits a sound signal that increases the frequency of the sound as the obstacle approaches!
Product features:

Brand new, high-quality 4-point reversing/parking sensor with buzzer.
When the reversing lights are on, power is supplied to the machine. Turning on the power is indicated by a short beep, then the device goes into the AUTO-CHECK state (automatic control mode of the device's systems).
The parking sensor is equipped with a special sound indicator (buzzer)
The device works properly if the reversing car is moving at a speed below 5 km/h.
The sensors can be mounted in the rear and front bumpers.
Ultrasonic sensors should not be dirty. Mud, dust, etc. may cause it to malfunction.

For proper installation of the device, it is necessary to:

Mark the mounting locations of the sensors.
Install the sensors in the holes made with the attached drill. Place the ultrasonic sensors so that they fit snugly to the bumper surface and align with the road surface. Ultrasonic sensors shall be positioned in such a way that no other parts of the vehicle are in their field of vision.
Connect the power cords. Connect the previously installed display to the control unit. Do not connect sensors yet.
Engage reverse gear with due care (if this requires switching on the ignition or starting the engine to turn on the power of the device). If the device is connected correctly, it will broadcast a short beep.
Connect one of the sensors to the control unit and set the obstacle at a distance of 1m from the sensor. The buzzer will send the right signal. In this way, the rest of the sensors should be checked. After the test, connect all sensors to the control unit.

Technical Specifications:

Supply voltage: DC12V (10.5V - 16V)
Supply current: 40mA~300mA
Sensor range: 0.3~2.0m
Vertical detection: 90 cm
Horizontal detection: 90 cm
Maximum power consumption: 4W
Sound signaling (dedicated buzzers)
Measuring the distance to an obstacle
Location of the obstacle position
Operating temperature(°C) -40~+80
Power cord length: 70 cm
Sensor cable length: 2.4 m
Sensor color: black

The set includes:

Central control unit
4 ultrasonic sensors
Buzzer - sound siren
Power cable
Special drill bit for drilling holes in the bumper for sensors (hole saw 22 mm)
Double-sided self-adhesive mounting pad
Manual

We invite you to place an order! 

Payment options

• Bank transfer
• Cash

Delivery options

• Collection in person
• National delivery
• International delivery

Shipping to countries