Epoxy clear adhesive 2x12ml Technicqll

€4.64 /piece price excl. VAT

Minimal order

1 pieces

Available quantity

26 pieces

Country

Poland

Grade

New

SKU:

3401#

EAN:

5902051000358

Message

Phone call

Epoxy clear adhesive 2x12ml Technicqll - description

Colorless epoxy adhesive with very fast, several-minute crosslinking time. Reliable and effective for durable bonding: glass, porcelain, ceramics, plastics (except PP, PE, PTFE), stone, concrete, marble, metals and their alloys, rubber, wood. Perfectly glues material combinations. Key features: Solvent-free Fast crosslinking time Two-chamber syringe Colorless Universal High resistance to electrical breakdown Water and temperature resistant Resistant to aggressive chemical agents (acids, alkalis, solvents, gasoline) and operating fluids After drying, it can be machined mechanically (grinding, drilling, threading) Safe to use Repair in minutes Precise dosing of ingredients, eliminates losses Creates an invisible weld Combines metals, ceramics, plastics For bonding electronic components For indoor and outdoor use For industrial applications Allows you to restore damaged threads and elements Application:
Clear epoxy adhesive is widely used during repairs where a colorless, invisible weld/filling is required or where the repair time should close in a few minutes. Thanks to its high resistance to electrical puncture, it is used for sticking and pouring electronic components for protection against moisture, dust, dirt and other contaminants. Clear epoxy adhesive is used to join glass, wood, stones, plastics, rubber, metals, metal alloys and combinations of these materials.
It is most often used in:
Jewellery (e.g. for combining amber with gold or silver) Electronics for gluing elements Household for emergency repairs Specifications:
Colorless
Lifetime after mixing: 1 min.
Pre-cure: 8 min. (at 20°C)
Complete curing: 12 h
Shear strength: 11.5 MPa
Temperature resistance: -30°C to 80°C
Shelf life: 36 months Directions for use: Surfaces to be joined should be sanded with sandpaper or file. Remove any dirt and degrease (use P-102 Cleaning Kit or P-959 Technical Degreaser). Squeeze out the right amount of ingredients and mix thoroughly until a uniform color is obtained. Apply the prepared mixture to one of the surfaces. Squeeze the elements firmly and leave fixed until the adhesive is fully cured.