Epoxy glue metal. 2x20ml Technicqll

€3.37 /piece price excl. VAT

Minimal order

1 pieces

Available quantity

48 pieces

Country

Poland

Grade

New

SKU:

3384#

EAN:

5902051000143

Message

Phone call

Epoxy glue metal. 2x20ml Technicqll - description

Composite of epoxy resins and metal powders, widely used in the repair of worn metal parts, alloys and castings as a result of: corrosion, friction, tearing, cracking, cavitation. It is characterized by a very high adhesion coefficient and excellent cooperation with metal parts in various temperature conditions. The content of metallic fillers ensures high thermal conductivity and reduces the expansion of the weld. so-called "liquid metal". also combines stone, glass, wood, most plastics (except PE, PP, PTFE and silicone rubber). Perfect for combining material combinations, e.g. concrete - iron, hard rubber - iron castings. Protects against corrosion. Typical applications include: Repair of metal parts, filling of cavities and welded joints Sealing of cast iron, steel, non-ferrous metal alloys Removal of leaks in central heating, water and sewage systems Restoration of broken seats of bearings, splines, threads and guides Embedding of metal elements in concrete Sealing of fuel tanks, heat exchangers (e.g. radiator), oil bowls, engine bodies Key features: Solvent-free Contains powdered light metal alloys Universal Water & temperature resistant Resistant to aggressive chemical agents Gray color After drying, it can be machined mechanically (grinding, drilling, threading) Benefits: Safe to use Excellent thermal conductivity Combines metals, ceramics, plastics For indoor and outdoor use For industrial use Ideal for metal parts Allows you to restore damaged threads and elements Parameters: Color: grey
Lifetime after mixing: 30 minutes
Pre-cure: 135 min. (at 200C)
Complete curing: 24 h
Shear strength: 12.0 MPa
Temperature range: -300C to 900C
Shelf life: 36 months Directions for use: Adhesive surfaces should be cleaned mechanically and roughened (sandblasting, sanding, sandpaper, file). Remove any dirt and degrease (use P-102 Cleaning Kit or P-959 Technical Degreaser). Squeeze out the appropriate amount of ingredients "A" and "B" in a 1:1 volume ratio and mix thoroughly until a uniform colour is obtained. Apply the prepared mixture to one of the surfaces. Squeeze the elements firmly and leave fixed until the adhesive is fully cured.