Epoxy Steel Paste 100g Technicqll

€8.35 /piece price excl. VAT

Minimal order

1 pieces

Available quantity

32 pieces

Country

Poland

Grade

New

SKU:

91-465#

EAN:

5902051000433

Message

Phone call

Epoxy Steel Paste 100g Technicqll - description

Two-component paste for repair or regeneration of elements and machine parts damaged by friction, corrosion, cavitation or impact. It contains graphite, which gives a self-lubricating effect. Irreplaceable for the regeneration of worn connecting rods, shafts, bearing seats, keyways. After curing, it can be painted over and machined mechanically (drilling, grinding, threading) Features: solvent-free easy to use thixotropic consistency contains graphite contains metal powders resistant to water and temperature allows regeneration of expensive elements resistant to aggressive chemical agents (acids, alkalis, solvents, gasoline) after drying can be processed (grinding, drilling, threading) Benefits: safe to use, just mix and apply, does not drip from vertical surfaces, reduces wear of components, improves machinability, good conductivity and thermal expansion for indoor and outdoor use, saving money for industrial use
allows you to recreate damaged elements Steel Paste is a two-component, thixotropic composite. Designed for repair and regeneration of elements and parts made of steel, cast steel, cast iron and non-ferrous metals. After complete curing, it can be subjected to mechanical treatment. It is resistant to weather conditions, temperature and aggressive chemical compounds (acids, alkalis, solvents, gasoline). Thanks to its properties, it is an alternative to expensive repairs It is widely used in car workshops, industrial plants as well as households. Typical applications include repair: repair and regeneration of broken bearing seats regeneration of knocked out and worn shafts removal of casting defects in castings made of cast iron, cast steel and non-ferrous metals. repair of broken keyways and guides repair of metal elements that will be subjected to further mechanical processing (turning, milling, threading, grinding) Parameters: Color: dark grey Life after mixing: 30 minutes Pre-curing: 120 minutes (at 200C) Complete curing: 24 h Wall strength: 11.0 MPa Temperature range: -400C to 1200C Shelf life: 36 months Directions for use: Glass Mesh T-048 can be used to strengthen the repaired area. Sand the repaired surface with sandpaper or file. Remove any dirt and degrease (use P-102 Cleaning Kit or P-959 Technical Degreaser). Prepare a bowl for mixing the ingredients. Apply two equal volume of A+B ingredients using different teaspoons - if in doubt, use less hardener (component B). Mix thoroughly until a uniform color and consistency is obtained, without streaks and air bubbles. Apply the mixed ingredients to the repaired element, first filling the gaps and depressions. Make repairs within 30 minutes of mixing the ingredients.