ONDRAGON 6V 12V CORDLESS MICROPROCESSOR RECTIFIER

ONDRAGON 6V 12V CORDLESS MICROPROCESSOR RECTIFIER - description

MICROPROCESSOR RECTIFIER 6V 12V Cordless

MCU (Microcontroller Unit) technology; PWM (Pulse-Width Modulation); LCD.

SPECIFICATIONS

rated voltage: 230V/50Hz
Supported battery voltages: 6V / 12V (pulse dynamic)
voltage identification for 6V: 2V - 7.4V
voltage identification for 12V: 8V - 14.5V
battery capacity 6V/12V: 6Ah - 200Ah
charging current: 0A - 15A
Charging Process: 8-step (smart or fast)
operating temperature: -30°C - 50°C
efficiency: 98%
supports batteries: VRLA, WET, GEL, EFB, AGM
built-in fan controlled by MCU
Net weight: 0.87kg
Power cord length: 136cm
length of "+" and "-" wires: 120cm

EQUIPMENT

rectifier
original box
Manual

Intelligent operating modes are one of the key advantages of the microprocessor control of our charger. Include:

Constant Voltage: This feature allows you to use a constant voltage to charge the battery, while controlling the charging current to prevent the battery from overheating.
Constant Current: This means that the charger maintains a constant charging current even if the battery voltage is lower than the voltage set on the charger, ensuring effective charging.
Trickle Charge Modulation: When the battery is almost charged, this mode automatically switches to floating charge modulation, providing the minimum current needed to maintain a full charge.
Floating Charge Modulation: This mode keeps the battery fully charged by continuously monitoring the state of charge and adjusting the charge current as needed.

Our charger offers an advanced charging process divided into 8 stages, ensuring optimal conditions for the battery:

DIAGNOSTICS: The first step is to analyze the condition of the battery and its connections to ensure the correct charging process.
DESULPHURISATION: If the battery sulphates, a special pulsed charge mode is used to help remove sulphate deposits.
ANALYSIS: The next step checks that the battery is in good condition and can accept a charging current, eliminating the risk of charging a damaged battery.
SOFT START: Charging with low current then begins, gradually increasing the charging value, which ensures a gentle start to the charging process.
MAIN CHARGE: In this step, the battery is charged at maximum current and the charge rate is automatically adjusted according to the state of charge, reaching 80% of the battery's capacity.
FINAL CHARGE: When 80% capacity is reached, charging enters final charge mode, gradually reducing the amperage to achieve full battery charge.
ANALYSIS: After the charging process is complete, the battery is tested, and if its charge level remains stable, the charging process is terminated.
PULSING: The final stage is to monitor the battery voltage and keep it optimally charged through pulses of charge current, ensuring long-lasting battery performance.

Our charger is equipped with advanced microprocessor control that ensures efficient and safe battery operation. Here are the security features it offers:

Surge Protection
Battery Diagnostic Function
Overheating protection
Short circuit protection
Reverse connection protection

---

Payment options

• Bank transfer
• Cash

---

Delivery options

• Collection in person
• National delivery
• International delivery

---

Shipping to countries