Network filter 1 5m M9 black

Network filter 1 5m M9 black - description

The M9 device has:
9 sockets with protective contact (10A/250V)safe, non-conductive, self-extinguishing housing signaling operationeasy installation to the ground two-stage protection systemSurge protection system: the reliability of this system is ensured by a varistor with a fast operating time of less than 25 nanoseconds and a high value of 6000A pulse absorbed, which provides effective protection against surges.
Short-circuit protection system: consists of a time-lag automatic fuse that does not need to be replaced.
REMARK:
In the absence of voltage in the filter sockets, check the fuse button (red under the switch). If necessary, press after 30 seconds. Do not block the fuse buttonThe device should only be used in installations with a protective contactComplete disconnection of the power strip from the power supply occurs after removing the plug from the power outletDo not use the damaged product. Protect from water and moisture. Do not use to power radiators, vacuum cleaners, refrigerators and other devices of this type. Use indoors. The maximum load current of all connected devices must not exceed 10A (2300W)Specifications:
- Rated voltage:~230 V, 50Hz- Maximum load:10A (2300 W)- Breaker:illuminated two-way- Fuse:automatic with delay action 10A / 240V- Leakage current:< 0,5mA- Energy absorption:155 J- Response time:< 25 ns- Voltage operating Uc:~250 V, 50Hz- Voltage protection level Up:≤ 1,2kV- Maximum discharge current:6000A (L/N) - 8/20 μs- Test voltage Uoc:4kV

---

Payment options

• Bank transfer
• Cash
• Payment online
• PayPal
• VISA
• MasterCard
• Maestro

---

Delivery options

• Collection in person
• National delivery
• International delivery

---

Shipping to countries