Seconds Adhesive GEL 2g Technicqll

€1.13 /piece price excl. VAT

Minimal order

1 pieces

Available quantity

31 pieces

Country

Poland

Grade

New

SKU:

3386#

EAN:

5902051000297

Message

Phone call

Seconds Adhesive GEL 2g Technicqll - description

Cyanoacrylate second adhesive in gel 2 gOne-component, colorless gel adhesive based on ethyl cyanoacrylate with the highest parameters of technical crosslinking adhesive under the influence of moisture. Thanks to its high viscosity and thixotropic properties, it does not run off vertical surfaces and is not absorbed by porous surfaces. It glues metal, rubber, porcelain and many plastics very tightly in a few seconds. Parameters:
Viscosity: gel
Shear strength: 3.5 MPa
Max. gap to be filled: 0.25 mm
Temperature range: -550C to 800C
Shelf life: 12 months Features:
•universality
•high gluing speed
•one-component
•high viscosityApplication:
Designed for gluing: metal, rubber, wood, ceramics, cement, hard plastics, glass, leather, plywood, aluminum, etc. (except PE, PP and Teflon). It glues hard and flexible materials also on vertical surfaces. Also used for bonding metal combinations "metal + rubber, plastics + rubber, paper + plywood + glass, etc." and O-ring gaskets. Benefits:
•glues all materials except polyolefins, PTFE, silicone rubber
•short repair time
•Easy to use
•does not run off, does not drip or is not absorbed by glued surfacesDirections for use:
1.When opening the tube for the first time, pierce the membrane with the top of the nut.
2.The substrate should be clean and degreased, Degrease the surface (P-102 or P-959 Technical Degreaser).
3.Apply the adhesive only to one of the surfaces to be joined.
4.Do not dispense the glue in large quantities (the less glue, the stronger the bond).
5.After applying the adhesive, connect the surfaces and press them down, holding them depending on the material to be glued from 10 to 90 seconds.
6.Thoroughly clean the applicator from adhesive residues, unblock the nozzle and close the tube.