Universal 433 92 MHz Self-Copying Remote Control

Universal 433 92 MHz Self-Copying Remote Control - description

Radio remote control, allows you to copy (clone) codes from other remote controls. It is able to copy almost all remote controls operating at 433.92 MHz with a fixed code.
The remote control has been carefully crafted and looks good. 4 buttons - under each there may be a different device for control. Designed for simple radio communication systems of the NO NAME type, i.e. not branded, or Chinese systems, such as roller shutters, remote control relay, remote firing of a four-wheeler, Chinese entrance gates.
✅ It can handle the control of entrance gates, garage gates, alarm installations, lighting, etc. Copying the code from another remote control is very simple - just bring both remote controls close to each other and press the button you want to copy. After making a copy, we can control the device with both the original remote control and the clone. Pressing buttons A and B erases the code memory, while pressing buttons C and D restores the erased codes. For branded systems, we recommend our co-pilot, which has a whole list of systems with which it cooperates.

✅ Technical data:voltage DC12Voperating current 10mAbattery - A27/12Vfrequency 433.92 MHz (fixed code)code copy functioncode erase function to be programmed four independent channelsrobust, aesthetically pleasing metal housingchromedimensions: 55mm x 29mm x 14mm✅ Instructions for self-copying remote control:Before first use, please clear the remote control testing code. Press the top two buttons at the same time until the LED flashes 3 times rapidly. Then release one of the buttons (keep the first one pressed) and press the released button 3 times, then release both buttons. The LED will not turn on when the buttons are pressed, which means that the memory has been cleared correctly. Learning mode. Press and hold the button you want to program, and then press the button you want to copy from another remote. Bring them closer to each other until the LED in the remote control starts flashing quickly and then lights up continuously, it means that the code has been memorized, release the button. Clicking again will send the code and the LED will blink, indicating that the copy was successful. Do the same for the other buttons. Recovery function. If you accidentally delete the code, you can press buttons 3 and 4 (small) at the same time until the LED passes quickly 3 times. The memory has been restored.

Payment options

• Bank transfer
• Payment online
• PayPal
• VISA
• MasterCard

Delivery options

• Collection in person
• National delivery
• International delivery

Shipping to countries