Wet polishing plaster coat
- Status
- The offer is out of date
- Minimal order
- 25 kilograms
- Available quantity
- 10000 kilograms
- Country
- Romania
- Grade
- New
- Brands
- Finish - Next
- Delivery time
- 15 days
- SKU:
- C1525607
- Last update
- 8 months ago
Current offers in this category
Offer's description
Putty ready for smoothing and finishing interior surfaces, synthetic resin aqueous dispersion, additives, fillers, with the following caracteristi¬ci: apply easy thanks creamy consistency has very good adhesion to properly prepared substrate, is drying fast, high white. Absor¬bţie represents a base with low and does not require priming before applying paint. Absor¬bţiei reduced because of the composition and provides significant savings in material finish (paint). It is advisable to apply the multilayer coatings may be applied up to 3 mm.
Use: can be applied manually or mechanically on the following formats: cementitious plasters, gypsum plaster-based plasters and cement-based plaster, concrete, gypsum board.
Instructions: The paste is applied to the base surface, in a layer thickness from 0.2 mm up to max. 3 mm. The mechanized application, the product can be diluted with max. 5% water. For application in several layers dry before applying the next layer is the layer above the surface, approx. 2:00, at a temperature of 20 ° C and 65% humidity. The surfaces may be smooth / grind after 12-24 hours (depending on the thickness and tem¬peratură) with fine sandpaper to give a smooth surface. To avoid cracking, prevents rapid drying or freezing. Media less absorbent is the emergence of bubbles and therefore, in this case, plaster will be applied as follows: apply a first coat diluted with 10% water, very thin and, following a slight zvântare (approx. 5 minutes .) to apply the second layer as thin and then, after drying surface (2 hours at 20 ° C tem¬peratură and 65% humidity) apply the final coat of plaster thick finish.
Surface drying time (to the touch): 2 hours, dryness (depth): 24 hours. Values are given for a temperature of 20 ° C and a relative humidity of 65%. Indicative specific consumption: 0.5-1 kg / m². The exact amount of the specific consumption will be determined after a test conducted on the spot. It depends on the thickness and surface roughness. Packaging: plastic bucket, 10 and 25 kg. Storage spaces răco¬roase, dry, Temparature between 5 ° C and 30 ° C in the original packaging, unopened. Shelf life: 24 months from date of manufacture comply with the terms of packaging and storage. See the date of manufacture and batch labeled on the packaging.