Rexva infrared heating foil - width 0,5m - length 150m

€6.08 /m² price excl. VAT

Order

Minimal order

11550 m²

Available quantity

50000 m²

Country

Czech Republic

Grade

New

Message

Phone call

Rexva infrared heating foil - width 0,5m - length 150m - description

Specifics:

XT308 model

220W/m2
220V
1m width
100m length (roll)

Made by Korii in the largest and oldest factory (not CHINA).
This type of heating originated more than 20 years ago in Korea, where it has been commonly used and improved for many years. This is the cheapest type of heating ever.

How to choose the right film? What kind of performance is for me?

In our offer you will find 99% of the most common variant of infrared heating foil, ie 230w / m2.

Weaker solutions, although perfectly covering the demand for thermal output, are characterized by a relatively large time delay before they reach their maximum of 28C (thus a longer waiting time to achieve the required thermal requirements). Each of the foils, whether weak or strong, reaches its maximum, ie 28C, weaker foils achieve it much later, and if they are located, for example, in a colder environment, they may not reach it, or so late that you lose one of the main advantages of the infrared heating foil, ie heating the space within 15 minutes.

ATTENTION: regardless of thermal energy, the energy consumption is the same. The difference is only in the speed of the heater, but the energy consumption is the same! Floor heating using a higher output film achieves the desired temperature faster, but with a lower output it takes more time to bring the surface layer to the appropriate temperature required by the customer.

The rate of temperature rise also depends on the size of the coverage area - the higher the percentage of floor coverage, the shorter the waiting time to reach the desired temperature.

The comfort of using the heating film in the floor heating system depends largely on the room touch temperature controller.

Advantages of Rexva storage heating

Low investment costs
Low operating costs
Low-cost connection with photovoltaic panels
Space saving - no boiler
Precise temperature control
Zone regulation
No radiators - more interior design options
Maintenance-free heating
No problems with refilling water into the system and venting
No risk of carbon monoxide poisoning
No risk of explosion
No need for construction and maintenance of the chimney
No loss of heat transfer - heat is produced at the place of use
Harmless to health
No electrosmog - Certification
CE Declaration of Conformity
The service life of the heating foil is 100 years

Rexva Technology

The heating foil works on the basis of the electrical resistance of carbon. The heating infrared film consists of carefully selected carbon and carbon paste and is applied using modern technologies (printing technology) to PET films.

This material is characterized by excellent insulating and refractory properties. The PET film is protected by a special LAMINEX film. An electrode made of copper tape acts as a conductor of electric current, while silver tape is a protection against sparking.

Infrared heating - a technology known for years

Infrared radiation has been known for many years - especially in medicine.

This technology is used in the treatment of musculoskeletal or dermatological diseases. By evenly heating all solids in the room without causing air convention, it is suitable for allergy sufferers and asthmatics.
It is also worth noting that infrared heated air does not dry out and thus does not lead to drying of the mucous membranes of the nose and conjunctiva.

Termofol meets the strictest limits of European legislation. Certification for electrosmog, CE, ROHS, ISO

Convection heating = warm and dry air + cold and damp walls.